View 16-213-T7D-AQ1R1QY-3T11_4522034.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co., ltd. http://www.ever light.com rev.2 page: 1 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan technical data sheet 0402 package chip led (0.45mm height) 16-213/t7d-aq1r1qy/3t features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? mono-color type. ? pb-free. ? the product itself will remain within rohs compliant version. descriptions ? the 16-213 smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide part no. chip resin color material emitted color 16-213/t7d-aq1r1qy/3t ingan pure white yellow diffused
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 2 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan package outline dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 3 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 120 mw electrostatic discharge (hbm) esd 1000 v operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec.
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 4 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv 72 ---- 140 mcd i f =5ma viewing angle 2 1/2 ---- 120 ---- deg forward voltage v f 2.7 ---- 3.2 v reverse current i r ---- ---- 50 a v r =5v bin range of luminous intensity & forward voltage symbol bin code min. max. unit condition i v q1 72 90 mcd i f =5ma q2 90 112 r1 112 140 v f 29 2.7 2.8 v i f =5ma 30 2.8 2.9 31 2.9 3.0 32 3.0 3.1 33 3.1 3.2 notes: 1.tolerance of luminous intensity 11% 2.tolerance of forward voltage 0.05v
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 5 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan chromaticity coordinates specifications for bin grading group bin code cie_x cie_y condition a 1 0.274 0.226 if= 5ma 0.274 0.258 0.294 0.286 0.294 0.254 2 0.274 0.258 0.274 0.291 0.294 0.319 0.294 0.286 3 0.294 0.254 0.294 0.286 0.314 0.315 0.314 0.282 4 0.294 0.286 0.294 0.319 0.314 0.347 0.314 0.315 5 0.314 0.282 0.314 0.315 0.334 0.343 0.334 0.311 6 0.314 0.315 0.314 0.347 0.334 0.376 0.334 0.343 notes: 1.the c.i.e. 1931 chromaticity diagram ( tolerance 0.01 ). 2.the products are sensitive to static electricity and care must be fully taken when handling products.
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 6 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan cie chromaticity diagram
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 7 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan typical electro-optical characteristics curves relative luminous intensity (%) ambient temperature ta (c) -60 1 10 -20 -40 0 20 60 40 100 80 100 1000 luminous intensity vs. ambient temperature 400 25 0 50 75 100 500 600 700 800 spectrum distribution wavelength (nm) ta=25c radiation diagram ta=25c relative luminous intensity (%) 70 0.7 0.5 0.4 0.1 0.3 0.2 90 80 0.6 1.0 0.9 0.8 0 10 40 60 50 30 20 forward current derating curve forward current i (ma) f ambient temperature ta (c) relative luminous intensity forward current i (ma) 1 10 10 10 f forward current luminous intensity vs. % 100 1000 ( 10000 ) ta=25c forward current vs. forward voltage ta=25c f forward voltage v (v) forward current i (ma) f
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 8 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan label explanation cat: luminous intensity rank hue: chromaticity coordinates ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm , unit = mm rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 9 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan carrier tape dimensions: loaded quantity 3000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 10 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 10sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 / 85%rh 1000 hrs. 22 pcs. 0/1
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 11 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan precautions for use 1. over-current-proof customer must apply resistors for protection, ot herwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile pre-heating 150~200c 60~120sec. above 217c 60~150sec. 260c max. 10sec. max. 6c/sec.max. above255c 30sec.max. 3c/sec.max. 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
16-213/t7d-aq1r1qy/3t everlight electronics co., ltd. http://www.ever light.com rev.2 page: 12 of 12 device no. : dse-0005374 prepared date: 05-jul-2011 prepared by: esther yan 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 16-213-T7D-AQ1R1QY-3T11

	To Download 16-213-T7D-AQ1R1QY-3T11 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .